555 TIG Welders UAE

TOWAM EQUIPMENT TRADING · UAE & GCC

555 TIG welding machines by Towam Equipment Trading are used for stainless steel, mild steel, aluminium, thin sheet, pipe and precision fabrication work in UAE conditions — wherever a clean, controlled weld matters.

View TIG Welders → · Ask Towam on WhatsApp →

What is TIG welding?

TIG (Tungsten Inert Gas), also called GTAW, strikes an arc between a non-consumable tungsten electrode and the workpiece, shielded by an inert gas (usually argon). Filler metal is added separately by hand with a rod, so you control heat and filler independently.

The result is a clean, precise, spatter-free weld with excellent control — ideal for stainless steel, mild steel and aluminium, thin sheet, pipe and visible joints where appearance and quality matter. TIG is slower than MMA or MIG, but it produces the highest-quality finish.

Which 555 TIG machine should I choose?

A quick guide to popular 555 TIG machines stocked by Towam. Where a figure isn't on the machine's data sheet, it's shown as Confirm with Towam rather than guessed. Prices vary by model — message us for the current price and UAE stock.

DC TIG — stainless & steel (220V single-phase)

AC/DC TIG — aluminium capable

Heavy DC TIG — 380V three-phase

Entry / occasional TIG

  • 555 ARC 250 GT — MMA (stick) + Lift TIG, 220V single-phase. A good pick if you mostly stick-weld but want occasional clean Lift TIG. Current range and duty cycle: Confirm with Towam. AED 1,050 · confirm stock. Ask on WhatsApp →

Duty cycle, tungsten capacity, gas requirements and exact current range vary by model — message us with your material and thickness and we'll confirm the right one. Compare 555 machines side by side →

AC/DC TIG note for aluminium

This is the single most important thing to get right. DC TIG welds steel and stainless steel — but it will not weld aluminium. Aluminium needs AC (alternating current) TIG, because the AC cleaning action breaks up the tough oxide layer on the metal's surface as you weld.

So if aluminium (or magnesium) is on your job list, choose an AC/DC machine such as the 555 TIG 200 AC/DC, 315 AC/DC or 400 AC/DC. If you only weld steel and stainless, a DC TIG machine is simpler and more cost-effective. Not sure? Ask Towam →

Best use cases for 555 TIG welders

  • Stainless steel fabrication
  • Aluminium welding (with an AC/DC machine)
  • Thin sheet metal and precision work
  • Pipe and tube welding
  • Food-grade, kitchen and architectural stainless
  • Automotive, exhaust and repair work
  • Visible / cosmetic welds where the finish matters

UAE support

  • UAE stock where available — held locally for fast delivery across the Emirates and GCC; we confirm availability per model when you ask.
  • Spare parts & consumables — genuine 555 spares, plus TIG torches, tungstens, collets and gas-side consumables kept on the shelf.
  • In-house repair — a dedicated UAE service and repair department, not just a sales counter.
  • Warranty support — backed locally; exact terms vary by model, confirmed before you buy.
  • WhatsApp technical help — talk to our team about tungstens, gas, settings and the right machine for your job.
  • Dealer / trade support — bulk and dealer pricing, priority stock and quotes for fabricators and resellers.

Before you choose

Model specifications, duty cycle, AC/DC capability, tungsten capacity, gas requirements, IP rating, warranty and stock availability vary by model. Towam can confirm the correct 555 TIG machine based on material (steel, stainless or aluminium), thickness, power input and site condition. TIG also needs shielding gas (typically argon) and the right tungsten and torch setup — ask us and we'll spec the full kit.

Need help choosing a 555 TIG welder?

Tell us your material — stainless, mild steel or aluminium — the thickness, and your power supply (single- or three-phase), and we'll point you to the right 555 TIG machine and confirm UAE stock.

WhatsApp Towam →

WhatsApp / phone: +971 50 767 0682 · Email: sales@towam.ae